SPF Validation Error: What It Means and How to Fix It
Updated: November 5, 2026 | Category: Email Authentication and DNS Troubleshooting
Quick Answer: What Is an SPF Validation Error?
An SPF validation error occurs when an email receiving server or DNS-checking tool cannot successfully validate a domain’s Sender Policy Framework (SPF) configuration.
Common causes include an incorrect DNS TXT record, multiple SPF records, an unauthorized sending server, invalid SPF syntax, too many DNS lookups, or a temporary DNS problem.
How to fix it: Check your domain’s SPF TXT record, ensure there is only one SPF policy at the relevant DNS name, include all legitimate sending services, correct syntax errors, and keep SPF evaluation within the 10-DNS-lookup limit.
The exact solution depends on whether the result is fail, softfail, permerror, temperror, or none.
What Is SPF in Email?
SPF stands for Sender Policy Framework. It is an email authentication standard that allows a domain owner to identify which mail servers are authorized to send email using that domain’s SMTP envelope identity.
For example, a company might use Google Workspace for employee email and a separate service for newsletters.
Its SPF policy should authorize the legitimate sending systems.
When an email arrives, the receiving server checks the sending IP address against the SPF policy published in DNS.
If the address is authorized, SPF can return a pass result. If it is not authorized, the result depends on the domain’s published policy.
SPF is defined in RFC 7208.
What Does an SPF Validation Error Mean?
The phrase “SPF validation error” is a general description rather than one specific standardized SPF result.
Different email providers, security gateways and online DNS tools may use it for different problems.
The actual result is important because it tells you whether the issue concerns authorization, DNS configuration or temporary lookup failure.
Also Read : Your Money Will Be Refunded Google Pay Error
| SPF Result | Meaning | What to Do |
|---|---|---|
| Pass | Sending IP is authorized by the SPF policy | No SPF authorization correction needed for this message |
| Fail | Sending IP is explicitly not authorized | Check the actual sending service and SPF policy |
| Softfail | Sending IP is probably not authorized | Review legitimate senders and the ~all policy |
| PermError | SPF policy cannot be correctly interpreted or evaluated | Fix syntax, duplicate records or lookup limits |
| TempError | Temporary error during SPF evaluation, usually involving DNS | Retry and investigate DNS availability if persistent |
| None | No applicable SPF record was found, or no usable identity was available | Check the relevant domain and publish SPF if needed |
| Neutral | Domain makes no assertion about authorization | Review whether the policy matches your security goals |
7 Common Causes of SPF Validation Errors
1. Missing SPF TXT Record
If the relevant domain does not publish an SPF policy, the result may be “none”.
Receiving servers cannot use SPF to confirm which systems are authorized for that identity.
Publish an SPF record that reflects your actual email providers.
2. Multiple SPF Records
A domain must not publish multiple SPF records at the same DNS name.
For example, these two separate TXT records are incorrect when published together:
v=spf1 include:_spf.google.com ~all
v=spf1 include:spf.protection.outlook.com ~all
Multiple SPF policies at the same name produce an SPF permanent error.
Instead, combine the required authorization mechanisms into one record after confirming that both services legitimately send email for your domain.
3. Incorrect SPF Syntax
An SPF record must begin with:
v=spf1
Syntax errors include incorrect separators, invalid mechanisms, unsupported formatting and malformed include statements.
For example:
Wrong:
v=spf1 include=spf.protection.outlook.com ~all
Correct:
v=spf1 include:spf.protection.outlook.com ~all
4. Too Many DNS Lookups
SPF evaluation is limited to 10 DNS-querying terms.
The mechanisms and modifiers that count include:
- include
- a
- mx
- ptr
- exists
- redirect
Nested includes also contribute to the lookup count when evaluated.
If the limit is exceeded, SPF must return a permanent error.
Direct IP mechanisms such as ip4 and ip6 do not count toward this particular limit.
5. Unauthorized Sending IP Address
An email may fail SPF because the sending server’s IP address is not authorized by the domain’s policy.
This commonly happens after changing email providers, adding a marketing platform or configuring a website to send messages through a new SMTP service.
Identify the actual sending system before changing the record.
6. Temporary DNS Problems
SPF validation depends on DNS.
If a DNS query times out or encounters a temporary server failure, the SPF result may be temperror.
Such errors can sometimes disappear after a retry.
Persistent failures require checking DNS hosting, authoritative nameservers and resolver behavior.
7. Incorrect SPF Record Location
SPF is evaluated for the relevant SMTP identity, commonly the envelope sender domain.
If email uses a subdomain as its return-path domain, publishing SPF only at the main domain may not be sufficient.
For example, an email sent with an envelope sender under bounce.example.com may require an appropriate SPF policy at that subdomain.
Check the actual domain being evaluated rather than assuming it is always the visible From address.
How to Fix SPF Validation Error Step by Step
Step 1: Identify the Exact SPF Result
Start with the error message or the email’s authentication results.
Look for:
spf=fail
spf=softfail
spf=permerror
spf=temperror
spf=none
These results require different troubleshooting actions.
For example, a permerror generally indicates a configuration problem, while a temperror can indicate a temporary DNS failure.
Step 2: Check Your Domain’s DNS TXT Records
On Windows, open Command Prompt or PowerShell.
Run:
nslookup -type=TXT example.com
Replace example.com with the actual domain used for SPF evaluation.
Look for a TXT record beginning with v=spf1.
Remember that a domain can legitimately have several unrelated TXT records for other purposes. Only multiple SPF policies at the same name are prohibited.
Step 3: Find the Authoritative DNS Provider
Log in to the service that manages your domain’s DNS records.
This may be Cloudflare, Hostinger, GoDaddy, Namecheap or another DNS hosting provider.
Open the DNS zone editor and locate the SPF TXT record.
Do not assume your website hosting company also controls your DNS.
Step 4: Keep One SPF Policy per DNS Name
If you find multiple TXT records beginning with v=spf1 at the same name, consolidate the legitimate authorizations.
Do not delete an existing record without first identifying all services that depend on it.
Removing a required include could cause legitimate outgoing messages to fail SPF.
Step 5: Correct the Sending Services
Identify every legitimate system that sends mail using the affected envelope domain.
Examples include:
- Google Workspace
- Microsoft 365
- Website transactional email
- Newsletter platforms
- Customer support systems
- Billing and notification applications
Follow each provider’s current SPF documentation.
Do not add an unknown sending IP simply because it appears in a failed email header. It could belong to an unauthorized sender.
Step 6: Reduce Excessive DNS Lookups
If your SPF checker reports more than 10 DNS-querying terms, inspect nested includes.
Remove unused sending services and unnecessary mechanisms.
Where appropriate, use separate subdomains for distinct sending services.
Avoid manually flattening dynamic cloud-provider IP ranges without a reliable maintenance process.
Step 7: Save, Wait and Retest
Save the corrected TXT record.
DNS changes may take time to become visible because of caching and record TTL values.
Check the published record again and send a test email from each authorized service.
Inspect the receiving server’s Authentication-Results header to confirm the SPF result.
SPF Record Examples for Google Workspace and Microsoft 365
The following examples are based on official provider documentation.
Important: Use these only when they match your actual sending configuration. Do not overwrite an existing record without accounting for other authorized senders.
Google Workspace Only
v=spf1 include:_spf.google.com ~all
This is Google’s documented example for domains that send mail exclusively through Google Workspace.
Microsoft 365 Only
v=spf1 include:spf.protection.outlook.com -all
This is a standard example for domains using Microsoft 365 as their only authorized outbound email service.
Google Workspace and Microsoft 365
v=spf1 include:_spf.google.com include:spf.protection.outlook.com ~all
This example authorizes both services. Other legitimate senders must also be considered.
Microsoft recommends keeping the total SPF evaluation within the DNS lookup limit and warns against manually flattening its frequently changing cloud IP ranges.
How to Fix SPF Validation Errors in Hostinger
If your domain’s authoritative DNS is managed through Hostinger, the process generally involves editing the DNS zone.
- Sign in to your Hostinger account.
- Open the domain management or DNS zone section.
- Locate the TXT records for the affected domain.
- Find the existing SPF policy beginning with v=spf1.
- Check whether it matches the email service you actually use.
- Correct the record according to your email provider’s instructions.
- Save the changes.
- Retest SPF after the DNS changes become visible.
SPF Fail vs Softfail vs PermError vs TempError
These four results are frequently confused.
| Result | Typical Cause | Does It Need a DNS Change? |
|---|---|---|
| Fail | Sender does not match an authorized mechanism and policy returns -all | Only if the sender is legitimate and missing from the policy |
| Softfail | Sender does not match and policy returns ~all | Possibly, after identifying the sender |
| PermError | Malformed record, duplicate SPF policies or excessive lookups | Usually yes |
| TempError | Temporary DNS lookup failure | Not always; investigate if persistent |
Do not automatically change -all to ~all simply to make an error disappear.
That changes how the domain expresses its authorization policy and does not fix a missing legitimate sender.
What Is the Difference Between ~all, -all and ?all?
The final all mechanism is often used to define how SPF should treat senders that do not match earlier authorization mechanisms.
| Mechanism | Meaning | Typical Result for Unmatched IP |
|---|---|---|
~all |
Softfail policy | Softfail |
-all |
Fail policy | Fail |
?all |
Neutral policy | Neutral |
+all |
Authorizes every IP | Pass |
How to Check SPF Validation in Gmail
Gmail can display email authentication information in the full message headers.
- Open a received email in Gmail.
- Click the three-dot More menu.
- Select Show original.
- Look for the SPF result and Authentication-Results header.
- Identify the domain and IP address evaluated.
- Compare the result with the published SPF policy.
For example, you might see a header similar to:
Authentication-Results: mx.example.net;
spf=fail smtp.mailfrom=example.com
This is an illustrative header, not an actual test result.
A failed SPF check does not always mean that the visible From domain itself is misconfigured. Check the SMTP envelope sender domain recorded in the header.
Can an SPF Validation Error Cause Emails to Go to Spam?
Yes. SPF problems can contribute to delivery failures, spam placement or message rejection, depending on the receiving provider’s policies and the results of other authentication checks.
However, SPF is only one part of modern email authentication.
Receiving systems may also evaluate:
- DKIM signatures.
- DMARC policy and identifier alignment.
- Sender reputation.
- Sending IP reputation.
- Message content and user engagement.
An SPF pass does not guarantee inbox delivery.
Likewise, an SPF failure does not necessarily mean the message is malicious.
SPF vs DKIM vs DMARC: What Is the Difference?
| Technology | Purpose | What It Checks |
|---|---|---|
| SPF | Authorizes sending servers | Sending IP against the SMTP identity’s domain policy |
| DKIM | Verifies a cryptographic email signature | Message signature using a DNS-published public key |
| DMARC | Defines policy for aligned authentication failures | Alignment of SPF or DKIM with the visible From domain |
For DMARC, either aligned SPF authentication or aligned DKIM authentication can satisfy the authentication requirement.
This matters because forwarded email often breaks SPF authorization checks even when the original sender configured SPF correctly.
A valid aligned DKIM signature may still allow DMARC to pass.
Why Does SPF Fail After Email Forwarding?
SPF checks the IP address of the server currently delivering the message.
When an email is forwarded through another server, the forwarding server’s IP may not be authorized by the original envelope sender domain.
As a result, SPF can fail even though the original message was legitimate.
Possible solutions include:
- Using forwarding systems that implement Sender Rewriting Scheme (SRS).
- Ensuring legitimate mail is signed with DKIM.
- Checking DMARC alignment and results.
- Reviewing the receiving server’s forwarding behavior.
Do not add every forwarding server’s IP to your domain’s SPF record without verifying whether it is actually an authorized sender for your domain.
Frequently Asked Questions
What does SPF validation failed mean?
It means SPF verification did not complete successfully for the checked identity. The precise reason depends on whether the result is fail, softfail, permerror, temperror or none.
How do I fix an SPF PermError?
Check for duplicate SPF policies, syntax mistakes, invalid include domains and more than 10 DNS-querying terms. Correct the DNS TXT record and retest.
What causes SPF TempError?
Temporary DNS resolution problems, timeouts or server failures can cause temperror. A later retry may succeed.
Can I have two SPF TXT records?
No. A single DNS name must not have multiple SPF records. Combine legitimate sending authorizations into one SPF policy.
How many DNS lookups are allowed in SPF?
RFC 7208 limits SPF evaluation to 10 DNS-querying terms. Nested includes can contribute to that total.
How long does an SPF change take to work?
It depends on DNS caching and TTL values. Some resolvers may see the change quickly, while others continue using cached information until it expires.
Can an SPF error stop WordPress contact form emails?
Yes, if your WordPress website sends email through a service that is not properly authorized for the envelope sender domain. Check the SMTP configuration and your email provider’s SPF requirements.
Does SPF pass guarantee DMARC pass?
No. SPF must also align with the visible From domain to satisfy DMARC through SPF. Alternatively, aligned DKIM can satisfy DMARC.
Should I delete my SPF record to fix an error?
No. Deleting the record can remove legitimate sender authorization. Correct the policy rather than removing it without a replacement plan.
Official Sources and Further Reading
- IETF RFC 7208 — Sender Policy Framework
- Google Workspace — Set Up SPF
- Microsoft Learn — Configure SPF for Microsoft 365
- Cloudflare — Set Up Google Workspace DNS Records
- IETF RFC 7489 — DMARC
Related Troubleshooting Guides
Explore more technical troubleshooting articles at Seminarsonly News.
Related topics include email delivery failures, DNS configuration problems, Microsoft 365 authentication errors, Gmail SMTP issues and WordPress contact form email failures.
TL;DR: SPF Validation Error Fix
- Meaning: SPF authentication or validation did not complete successfully.
- Missing SPF: Check the relevant domain and publish the correct TXT record.
- Duplicate SPF: Merge legitimate authorizations into one policy.
- SPF fail: Check whether the sending IP is authorized.
- SPF permerror: Fix syntax or excessive DNS lookups.
- SPF temperror: Investigate temporary DNS problems.
- DNS limit: Maximum 10 DNS-querying terms during SPF evaluation.
- After fixing: Retest SPF, DKIM and DMARC using real messages.
Bottom line: The most effective way to fix an SPF validation error is to identify the exact SPF result, inspect the relevant DNS TXT record and correct the underlying authorization or DNS problem without disrupting legitimate email services.
Editorial note: Updated November 5, 2026. This independent troubleshooting guide is based on RFC 7208 and official Google, Microsoft and Cloudflare documentation. Provider-specific SPF values should always be checked against current service instructions.
Pingback: JAMB Data Error Candidates Cleared : Over 3,000 Candidates Cleared