What is Destiny 2 Error Code Plum?
Destiny 2 Error Code Plum is a network connectivity error that occurs when your connection to the Destiny 2 servers becomes unstable or is lost entirely. This error typically appears during gameplay with the message “You have been returned to orbit. Error code: Plum.” Unlike some other error codes that indicate specific server issues, Plum is primarily a client-side network problem that affects players across all platforms including PC (Steam), PlayStation, Xbox, and Stadia. The error can happen during any activity – from patrols to high-stakes raids – causing frustration for players.
Quick Answer: How to Fix Destiny 2 Error Code Plum
Restart your router and gaming device, switch to a wired Ethernet connection, enable UPnP on your router, forward Destiny 2 ports, and verify your NAT type is Open. If using Wi-Fi, move closer to the router or upgrade to a 5GHz connection. Contact your ISP if packet loss exceeds 1%.
What Causes Destiny 2 Error Code Plum?
Several network-related factors trigger this error:
- Unstable Internet Connection: Packet loss, high latency, or frequent disconnections
- Wi-Fi Interference: Signal degradation from distance, walls, or other devices
- Strict NAT Type: Router settings blocking proper peer-to-peer connections
- ISP Throttling: Internet provider limiting bandwidth for gaming traffic
- Server-Side Issues: Temporary Bungie server instability or maintenance
- Firewall/Antivirus Blocking: Security software interfering with Destiny 2 network traffic
- Outdated Network Drivers: Old drivers causing compatibility issues
- DNS Resolution Problems: Slow or failing DNS lookups to Bungie servers
How to Fix Destiny 2 Error Code Plum: Step-by-Step Solutions
Method 1: Restart Your Network Equipment
A fresh network handshake often resolves connectivity issues:
- Power off your gaming device completely
- Unplug your router and modem from power
- Wait 2 minutes for full discharge
- Plug in modem first, wait for all lights to stabilize
- Plug in router, wait for full boot-up
- Power on your gaming device and test Destiny 2
Method 2: Switch to Wired Ethernet Connection
Wi-Fi is the leading cause of Error Code Plum:
| Connection Type | Latency | Packet Loss Risk |
|---|---|---|
| Wired Ethernet | 1-5 ms | Very Low (<0.1%) |
| 5GHz Wi-Fi | 5-15 ms | Low (0.1-0.5%) |
| 2.4GHz Wi-Fi | 10-30 ms | Medium (0.5-2%) |
| Powerline Adapter | 5-20 ms | Medium (0.5-1%) |
- Use Cat6 or Cat7 Ethernet cable for best performance
- Connect directly to router, avoid switches if possible
- Test with ping:
ping 8.8.8.8 -tshould show <1% packet loss - If Wi-Fi is your only option, use 5GHz band and sit within 10 feet of router
Method 3: Enable UPnP on Your Router
UPnP (Universal Plug and Play) allows Destiny 2 to automatically open the ports it needs:
- Access router admin panel (usually 192.168.1.1 or 192.168.0.1)
- Find UPnP settings under Advanced > NAT or Gaming section
- Enable UPnP and save settings
- Restart router after enabling
- Test Destiny 2 to see if error is resolved
Method 4: Forward Destiny 2 Ports Manually
If UPnP does not work, manually forward these ports:
| Platform | TCP Ports | UDP Ports |
|---|---|---|
| PC (Steam) | 27015-27050, 3074 | 27015-27050, 3074, 3097 |
| PlayStation | 1935, 3478-3480, 3074 | 3074, 3478-3479, 3097 |
| Xbox | 3074 | 88, 3074, 3075, 3097 |
Method 5: Check and Change NAT Type
Your NAT type determines how easily Destiny 2 can connect to other players:
- Open NAT (Type 1): Best for gaming – no restrictions
- Moderate NAT (Type 2): Works but may cause some connection issues
- Strict NAT (Type 3): Likely causes Error Code Plum frequently
- Check NAT type in Destiny 2: Settings > Network
- To open NAT: Enable UPnP, forward ports, or place console in DMZ
Method 6: Update Network Drivers
Outdated drivers can cause intermittent disconnections:
- Windows: Device Manager > Network adapters > Right-click > Update driver
- Download from manufacturer: Intel, Realtek, Killer Networking
- Console: Update system software to latest version
- Restart after updating drivers
Method 7: Change DNS Servers
Slow DNS resolution can cause connection drops:
- Google DNS: Primary 8.8.8.8, Secondary 8.8.4.4
- Cloudflare DNS: Primary 1.1.1.1, Secondary 1.0.0.1
- OpenDNS: Primary 208.67.222.222, Secondary 208.67.220.220
- Change in router settings for all devices, or console/PC network settings
Destiny 2 Error Code Plum: Platform-Specific Fixes
| Platform | Specific Fix |
|---|---|
| PC (Steam) | Verify game files in Steam. Disable Windows Defender real-time protection temporarily. Update network adapter drivers |
| PlayStation 5 | Settings > Network > Test Internet Connection. Rebuild database in Safe Mode if persistent |
| Xbox Series X/S | Settings > Network > Advanced settings > Alternate MAC > Clear. Restart console |
| PlayStation 4 | Initialize router connection. Set static IP. Use LAN cable instead of Wi-Fi |
How to Prevent Destiny 2 Error Code Plum
- Use wired Ethernet whenever possible
- Keep router firmware updated
- Maintain Open NAT type
- Close bandwidth-heavy apps while playing (streaming, downloads)
- Schedule router reboots weekly
- Monitor Bungie server status at Bungie Help
When to Contact Bungie Support
If you have tried all solutions and still get Error Code Plum, contact Bungie Support with:
- Your platform and gamertag/Steam ID
- Network test results (speed, ping, packet loss)
- Router model and settings
- ISP name and plan
- Steps you have already tried
TL;DR – Quick Fix Summary
Destiny 2 Error Code Plum is a network error fixed by:
- Restarting router and gaming device (wait 2 minutes)
- Switching to wired Ethernet connection
- Enabling UPnP on router
- Forwarding Destiny 2 ports (3074, 3097, platform-specific)
- Verifying NAT type is Open
- Updating network drivers
- Changing to Google DNS (8.8.8.8) or Cloudflare (1.1.1.1)
Start with Method 1 and 2 for fastest results. Wired connection eliminates 80% of Plum errors.
